| Customization: | Available |
|---|---|
| Certification: | ISO, CE |
| OEM: | Yes |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
dental vacuum forming machine
Power supply voltage: 220V/50 HZ
Weight: 6 kg
Dimensions: 25x21x30cm
Usage of dental vacuum forming machine:It has a wide range of uses and is used to make orthodontic retainers, whitening tray implant positioning guides, bracket transfer devices, etc.
Operation of dental vacuum forming machine:
1,Connect power (220/110VF 50/60Hz), check the forming machine and galvanothermy pipe, make sure they are working.
2,Rotate the upper-cover (to the left or right )by 90°.Place the diaphragm between the upper and lower frames. Turn down the ball-head pull rod to fix the diaphragm. Replace the upper-cover.Turn down the wrench to lift the frames to proper height. (There's position-limited marble on the top of the spindle),meanwhile put the packed product in the middle of the net board. Turn on the heating-up switch to heat the diaphragm.
3. After about 2 or 3 minutes, when the diaphragm is 1 cm lower than the lower frame. Turn off the heating-up switch, set down the frames, and start the vacuum machine to molding the package.
How to use the vacuum forming splint sheets:
1. Tear off the protective film on both sides of the vacuum forming splint sheets
2. Heat the vacuum forming splint sheets with a vacuum forming machine
3. Place the heated vacuum forming splint sheets on the finished plaster model and evacuate it. After cooling, you will get a negative mold of the patient's mouth shape.
FAQ
Q: Does the dental vacuum forming molding machine equip with steel ball?
A: yes, there is steel ball together with this machine
Q: what's the usage of steel ball?
A: It's used to bury part of model that doesn't need to be formed.
){kind=link}